Menu
AccuCapper™ E is an electric, handheld capper for low production or lab environments where compressed air is not available. The AccuCapper™ E can tighten or remove caps with diameters up to 25mm and is a great capper for a variety of industries.
AccuCapper™ E is an electric, handheld capper for low production or lab environments where compressed air is not available. The AccuCapper™ E can tighten or remove caps with diameters up to 25mm and is a great capper for a variety of industries.
Each unit features an adjustable clutch to ensure proper torque and eliminate cap and decrease insert wear. Once the closure reaches the set torque value, the chuck will stop rotating, signaling the operator to move on to the next container.
The AccuCapper™ E ships standard with a stand, overhead slide rail, and self-balancer which allows the AccuCapper™ E to be suspended neatly and weightlessly overhead, out of the way during case changes and reducing operator fatigue.
The AccuCapper™ E ships with one Chuck and Insert (up to a Size #30).
Screw and Lug Configurations
| Cap Size: | 5mm – 25mm |
| Electrical Requirements: | 110 VAC (optional: 220 VAC) |
| Torque Range: | 1 – 15 In-Lb |
| model: | AccuCapper-E |
| height: | N/A |
| length: | 8.25 |
| width: | N/A |
| weight: | 2 lbs. (0.9 kg) |
| speed: | Operator Dependant |
Headquarters
2980 Scott St, Vista, CA 92081
Phone: (760) 734-4177
Fax: (760) 734-4188
Open: 8:00 am – 4:30 pm
Texas
8051 Jetstar Dr #175 Irving, TX 75063
Phone: (972) 915-6888
Fax: (972) 915-6999
Open: 8:00 am – 4:30 pm
Florida
14231 Jetport Loop. #1 Fort Myers, FL 33913
Phone: (239) 225-4020
Fax: (239) 225-4024
Open: 8:00 am – 4:30 pm
